Hitachi CP-WUX645N Scheda Tecnica Scaricare il pdf (Pagina 121)

3. Management with Web browser software

3.3 Projector Management using SNMP

The SNMP (Simple Network Management Protocol) enables to manage the

projector information, which is a failure or warning status, from the computer on

the network. The SNMP management software will be required on the computer

to use this function.

• It is recommended that SNMP functions be carried out by a network

administrator.

• SNMP management software must be installed on the computer to monitor

the projector via SNMP.

NOTE

SNMP Settings (



16)

Congure the following items via a web browser to use SNMP.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter “http://192.168.1.10/” into the address bar of the web browser.

2) Enter the Administrator ID and Password and click [Logon].

3) Click [Port Settings] on the main menu.

4) Click [Enable] check box to open the SNMP Port. Set the IP address to send

the SNMP trap to when a Failure/Warning occurs.

5) Click [Security Settings] on the main menu.

6) Click [SNMP] and set the community name on the screen that is displayed.

7) Congure the settings for Trap transmission of Failures/Warnings. Click

[Alert Settings] on the main menu and select the Failure/Warning item to be

congured.

8) Click [Enable] check box to send out the SNMP trap for Failures/Warnings.

Clear [Enable] check box when SNMP trap transmission is not required.

9) Click [Apply] button to save the settings.

• A Network Restart is required after the Community name has been

changed. Click [Network Restart] and congure the following items.

NOTE

• A Network Restart is required after the SNMP Port conguration

settings have been changed. Click [Network Restart] and congure the

following items.

NOTE

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 175 176

Nessun commento

Hitachi CP-WUX645N Scheda Tecnica Pagina 121