Hitachi VT-FX6404A Manuale Utente

1VIDEO CASSETTE RECORDER VT-FX6404A Owner's manual Using these quality features: • The VCR Plus+* programming system allows you to program

10Install batteries in the remote control The remote control requires two "AA" batteries. 1 Insert your fingertip into the notch and push

111 Make sure there is no obstacle between the remote control and VCR's infrared receiver. Note: You cannot operate the VCR if there is an obs

12 The VCR automatically enters the playback mode when a cassette without its safety tab is inserted. The VCR won't record on a tape without a

13 Basic Hookup with Antenna: RF Hookup * PURCHASED SEPARATELY Switch the RF Channel When the VCR is on, its video signal can come into your TV on

14 * PURCHASED SEPARATELY BASIC CABLE HOOKUP [C] WITH THIS HOOKUP YOU CAN... • WATCH AVAILABLE CABLE CHANNELS • RECORD AND WATCH THE SAME CHANNEL •

15 Switch the RF Channel When the VCR is on, its video signal can come into your TV on either channel 3 or channel 4. You need to select the appro

16 * PURCHASED SEPARATELY BASIC CABLE HOOKUP -WITH CABLE BOX [E] WITH THIS HOOKUP YOU CAN... • WATCH AVAILABLE CABLE CHANNELS • RECORD AND WATCH

17 Switch the RF Channel When the VCR is on, its video signal can come into your TV on either channel 3 or channel 4. You need to select the approp

18 Advanced Hookup with Cable Box: AV Hookup * PURCHASED SEPARATELY ADVANCED CABLE HOOKUP -WITH CABLE BOX AND SPLITTER [G] WITH THIS HOOKUP YOU CAN

19 Advanced Hookup with Cable Box and Splitter: AV and RF Hookup * PURCHASED SEPARATELY AUTO INSTALL Setting the channel automatically 1 Switch on

2TABLE OF CONTENTS FOR YOUR SAFETY...

20 When the auto install is complete, the channel with the lowest number appears in the TV display. Notes • If you press the POWER button

21 1 Press the GUIDE button. The main on-screen menu will appear on the TV screen. You may view all the on-screen instructions in English, Fre

22 5 Press the cursor button to select the minutes, and then press or cursor button to change the minutes. 6 Press the cursor butto

23 8 Press the cursor button to select YEAR, and then press the or cursor button to change the year. 9 Press the GUIDE button. T

24 2 Press the GUIDE button. The main on-screen menu will appear on the TV screen.

25The VCR will automatically select CATV1 or ANT and store channels received in your area. It takes about 2 - 3 minutes. If CATV1 doesn't give

26 3 Press the cursor button to select the channel, and then press the ENTER button.

27 7 Press the GUIDE button to return to regular viewing.

28 4 Press the cursor button to select AUTO BLUE "ON" or "OFF". ON: The screen beco

29 2 Press the GUIDE button. The main on-screen menu will appear on the TV screen. 3 Press the cursor button to select the SETUP option and t

3RECORDING A PROGRAM...44 Basic recording steps...

306 Press the GUIDE button. The main on-screen menu will appear on the TV screen. 7 Press the cursor button to select SETUP option, and then p

31 10 Using the VCR remote, press the or cursor button to enter the cable box output channel numbers. 11 Press the GUIDE button to end this

32 3 Press the PLAY button to start playing the tape. If you press the PLAY button and the cassette has not been inserted, the warning screen w

33 Movie Return If your video cassette has the safety tab removed, the VCR will stop and automatically rewind the videocassette, eject it, and

34 Press the CH ( or ) button on the remote control or TRACKING button on the VCR when viewing a cassette. Press either the or buttons u

35 Note: The sound is muted and cannot be heard during "Special Playback Effects". N

36Press the STOP button to stop the tape. Notes: • Use the CH ( or ) button to minimize any visual noise bands on the screen. • After 1 minute in

37 2 Press the cursor button to select the SETUP option, and then press the ENTER button.

38How to use the shuttle ring 1 Turn the shuttle ring during playback or still playback (pause). • As you turn the ring, you get different playbac

39 NOTE: This function only works with recordings that have been set up with indexing. 1 Press the button (rewind) or the button (forward) t

4This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it shoul

40 • BLANK SEARCH cannot be operated with a cassette without a safety tab. • BLANK SEARCH may not operate when a blank section lasts no more

41Switching rewind or fast forward to visual search (EASY VIEW) Hold down the (VIEW/SKIP/BLANK) button during rewind (or fast forward), and the mo

42While playing back your tape you can skip forward by pressing the (VIEW/SKIP/BLANK) button. The tape will search ahead for about a minute and

43 • The tape remaining time is not displayed correctly for a tape without any recordings or tapes other than T-30/60/90/120/140/160/180/210.

44 4 Press the STOP button when you are done recording or playing back the tape.

45Note: You may use a blank tape or you may record over a previously recorded (erasable) tape. 1 Turn on TV and select the video channel (3 or 4).

46 Example: Select channel 8. • 100/ENT and and for the channel 124. 5 Press the REC button on

47 6 Press the STOP button to finish recording. RECORDING A PROGRAM -RECORDING TIPS To watch one progra

48 VCR, and you'll see the program you are recording. • If you're hooked up with an audio/video cable: Switch the TV from AUX or VIDEO m

49To record a Second Audio Program (SAP) Some stations transmit a Second Audio Program - such as in a second language. If a station broadcasts in S

55 Power Sources -- This video product should be operated only from the type of power source indicated on the marking label. If you are not sure o

504 Press the and cursor button to set the STEREO/MONO option to "STEREO". 5 P

51Before you begin Assemble the information you need for timed recording: • Be sure that the clock is set to the correct time • Date and day of the

52 • Erase any unnecessary programs, please refer to page 40 "Reviewing what you have programmed". Types of Delayed Recordings

536 Press the cursor button to select the minutes, and then press the or cursor button to change the minutes of the start time. 7 Pres

54 11 Press the cursor to select the recording date, and then press the or cursor button to change the date. 12 Press the PROGRA

55seconds. 13 Press the POWER button to turn off the VCR. The delayed recording indicator will display on the VCR. This tells you that the VCR

56Important: Your timed recording settings take effect when you turn off the power on the VCR. USING THE VCR PLUS+ SYSTEM FOR RECORDING About the VC

5720 (PBS) 08 42 (Cable News Network) 38 Note in the example that the channel numbers are the same except for 20 (received on channel 8) and 42 (re

58The main on-screen menu will appear on the TV screen. 3 Press the cursor button to select SETUP option, and then press ENTER button. 4

59 In this example broadcast channel 38 is assigned to VCR Plus+ channel 42. Note: If you enter a wrong digit, Press the CLEAR button to erase t

6 13 Power Lines -- An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power c

60 2 Press the PROGRAM button to select VCR PLUS+ RECORDING. • If eight programs have already been stored in memory, "FULL" will fla

61disappears from the screen in about 10 seconds. 5 Press the or cursor button to select ONE TIME, DAILY or WEEKLY PROGRAM, and then press

62 Note: If program is overlap, the VCR gives you an error message that disappears from the screen in about 5 seconds. 8 Press the POWER button

63 1 Press the GUIDE button. The main on-screen menu will appear on the TV screen. 2 Press the ENTER button to select the PROGRAM MENU.

64 5 Press the GUIDE button to end. PROGRAMMING THE VCR REMOTE TO CONTROL YOUR TV The VCR remote control can be programmed to control m

65 4 Press the remote button corresponding to your TV brand as shown in the set-up chart. The TV channel will change to confirm that the remote con

66PROGRAMMING THE VCR REMOTE CONTROL TO CONTROL YOUR CABLE BOX The VCR remote control can be programmed to control many cable boxes that are remote

67number button number button Jerrold 1 1 Zenith 5 Jerrold 2 2 Scientific Atlanta 6 Jerrold 3 3 Pioneer 7 Hamlin 4 Philips 8 Note: If your

68 * PURCHASED SEPARATELY To record from stereo BEFORE YOU BEGIN... • Make sure the VCR is connected to your stereo system, as shown above. •

69 4 Press the STOP button to stop recording. COPYING TAPES FROM A CAMCORDER Hook-up You may use your VCR to copy tapes from any camcord

7perform safety checks recommended by the manufacturer to determine that the video product is in safe operating condition. CUSTOMER CONTROLS VCR Cus

70 2 Press the REC, then PAUSE buttons on the VCR remote control. The VCR will go into Record/ Pause. 3 Press the PLAY button on th

71 1 Press the AVX button on the remote control of VCR-1 so that L (line) appears in the display. 2 Press the REC, then PAUSE buttons on VC

72Problem guide No power • Make sure the VCR is plugged into an AC outlet. Remote control doesn't work • Make sure the batteries are fresh, and

73The following indications appear in the VCR display and OSD screen to tell you the current status of your VCR. ODS Indication When it appears

74at 1-800-995-4500 (in the continental United States). For ALASKA and HAWAII, please contact the nearest Hitachi Regional Office. Design and specif

8 been inserted or a cassette without a safety tab has been inserted) Accessories supplied Check and ide

9 Item No. Function 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Transmission window POWER button TAPE SPEED button - select